Ice Maker Repair Bradenton: Ice Maker Repair Service at Home
Our ice maker repair Bradenton technicians fix ice makers that stop making ice, leak, jam or make small cubes, and quote the part before replacing it.
100+ Reviews
Ice maker repair in Bradenton, FL
Quick answer
Bradenton Appliance Pros repairs built-in refrigerator ice makers and dispensers across Bradenton, FL, on French door, side by side and top freezer models. A weeping water inlet valve is the most common cause, so the valve gets tested before the ice maker itself is replaced. Call (941) 213-8090.
The calls we hear most: the ice maker just stopped, the cubes come out small or hollow, the ice tastes off, or the ice freezes into one block.
If the fridge itself is warm or leaking, see refrigerator repair instead. For everything else we fix, see our appliance repair in Bradenton overview.
Refrigerator ice maker repair vs stand-alone units
Ice makers built into French door, side by side and top freezer refrigerators are our focus, including Samsung, LG, Whirlpool and GE models. If you own a stand-alone or under-counter ice maker, call (941) 213-8090 and ask before you book.
Ice maker repair service: common failures
Our ice maker repair service handles water inlet valves, frozen fill tubes, ice maker modules, water filters and door dispenser faults. Here is what you might notice, the usual cause and what the technician tests first.
| What you notice | Usual cause | What we test first |
|---|---|---|
| The ice maker stopped making ice | Water inlet valve, frozen fill tube or a failed ice maker module | Freezer temperature, water supply, then the inlet valve |
| Cubes are small or hollow | Low water flow from a clogged filter, a kinked line or a weak inlet valve | Filter age and water flow at the valve |
| Ice freezes into one solid block | A weeping inlet valve, or ice sitting too long without the dispenser being used | Inlet valve for weeping |
| Ice is made but will not dispense | Auger motor, dispenser door or a door switch | Auger motor and door switch |
| Ice buildup in the door ice compartment | Common on Samsung French door models; a seal or airflow problem lets ice build up | Door seal and airflow, once the ice thaws |
| Water under the fridge near the ice maker | Weeping inlet valve, cracked fill tube or a loose supply line | Supply line, fill tube and valve |
| Whirlpool French door ice maker will not cycle | Module fails the home-position test | Module test cycle |
Parts that fail most often
Have the model number ready when you call so the technician knows which parts fit your fridge.
Water inlet valve
Lets water into the ice maker. A valve that weeps keeps dripping, freezes the fill tube and stops ice. The valve gets replaced, not the whole ice maker.
Fill tube
Carries water from the valve to the mold. When it freezes solid, no water reaches the ice maker even though the rest works.
Ice maker module
Runs the harvest cycle. The technician runs a test cycle before deciding the module itself has failed.
Water filter
A clogged or old filter cuts water flow, so cubes come out small or hollow.
Auger motor
Pushes ice to the dispenser. If it stalls, ice clumps in the bucket and nothing comes out.
Door ice compartment
On French door models, a worn seal or airflow fault lets frost build up around the ice maker in the door.
Supply line and shutoff valve
A kinked line or a half-closed valve behind the fridge starves the ice maker of water.
Freezer temperature
The ice maker needs a cold freezer, around 0°F. A warm freezer points to a fridge problem, not the ice maker.
What the visit looks like
- Book. Call (941) 213-8090, any hour. Have the brand and model number ready.
- Check. The technician checks freezer temperature, water supply and the filter first.
- Test. The inlet valve, fill tube and ice maker are tested, and a harvest cycle is run.
- Quote. You hear what failed and the full price before any work starts.
- Repair and test. Once you say yes, the part is replaced or ordered by model number, and a full harvest cycle is run before the technician leaves.
After the repair, allow about 24 hours for a full bin of ice, and throw out the first batch or two.
Why Bradenton homeowners call us
What you can count on from the first call to the final test run.
Price before any work
You hear what failed and the full price in your home. Nothing is repaired until you say yes.
Open 24 hours, 7 days
Call day or night. We set the visit time with you on the phone, so you know when to expect us.
Tested, not guessed
The technician confirms the failed part with a meter or the appliance diagnostic mode before replacing anything.
Eight major brands
Samsung, LG, Whirlpool, GE, Frigidaire, Maytag, KitchenAid and Bosch, in kitchens and laundry rooms.
Certified for sealed systems
Refrigerant work is done only by technicians who hold EPA Section 608 certification.
Straight repair or replace advice
If an older unit is not worth fixing, you hear that before you pay for parts.
What Bradenton customers say
Feedback from Bradenton area homeowners after a repair visit.
What ice maker repair costs in Bradenton
The same symptom can be a filter or a module, so we quote after testing. These cost levels are estimates, not quotes.
| Cost level | Typical repairs |
|---|---|
| Lower | Water filter, supply line, thawing a frozen fill tube |
| Moderate | Water inlet valve, auger motor, dispenser door parts |
| Higher | Ice maker module, door ice compartment repairs on French door models |
You get the full price before work starts. When a repair uses parts, Florida sales tax applies to the whole invoice.
No ice today?
Call (941) 213-8090 any time, day or night. Tell us the brand, the model number and what the ice maker is doing.
Bradenton conditions that cause this
Mineral scale in local water can clog the inlet valve screen and slow the fill, which is one reason cubes come out small. Summer heat makes the freezer work harder, and a freezer that drifts above 0°F makes less ice. Humidity adds frost every time the freezer door opens, which can build up in the door ice compartment on French door models. During hurricane season, June 1 to November 30, outages can leave a frozen fill tube and surges can damage the ice maker module.
Before you call: quick homeowner checks
- Switch. Make sure the ice maker is turned on and the shutoff arm or sensor is not stuck in the off position.
- Freezer. The freezer should be near 0°F. If it is warm, the problem is the fridge, not the ice maker.
- Water. Check that the shutoff valve behind the fridge is open and the line is not kinked.
- Filter. If the filter is past its replacement date, a new one may fix small or hollow cubes.
Stop there. Do not chip ice off the ice maker with a knife or pry panels loose. Unplug the fridge and call if you see water near the outlet.
Ice maker repair across Bradenton and Manatee County
We cover Bradenton ZIP codes 34201, 34203, 34205, 34207, 34208, 34209, 34210, 34211 and 34212, plus Lakewood Ranch, Palmetto, Ellenton, Parrish, Cortez, Anna Maria Island, Bradenton Beach, Sarasota, Venice, North Port, Osprey and Nokomis. Check your ZIP on our service area page, or see how a repair visit works.
Other appliances we repair
Ice Maker Repair Bradenton FAQ
Book ice maker repair in Bradenton
You hear the full price before any work starts. Call (941) 213-8090 for ice maker repair in Bradenton.
Hours: Open 24 hours, 7 days a week
Service area: Bradenton, Lakewood Ranch, Palmetto, Ellenton, Parrish and nearby Sarasota County.
Open 24 hours, 7 days
Call to book your repair
(941) 213-8090- Tell us the appliance, the brand and what it is doing
- Have the model number ready if you can
- Set the visit time on the phone
- Hear the full price before any work starts